Loading ...
Loading ...
Loading ...
SHS800X&SHS1000X User Manual
110
WWW.SIGLENT.COM
LIN Trigger and Serial Decode
Please take the order of “Setup for LIN Signals”, “LIN Trigger” and “LIN
Serial Decode” to trigger and decode the signals.
Setup for LIN Signals
There are two steps of setting the LIN signal, connecting the signal to
oscilloscope, and specifying each input signal's parameters.
1. Press the
Shift and Print button to enter the DECODE function menu.
2. Press the Decode softkey and select the desired slot (Decode1 or Decode2).
3. Press the Protocol softkey and then select LIN by turning Universal Knob.
4. Press the Signal softkey to enter the SIGNAL menu as below shows.
Figure 58 LIN SIGNAL Menu
5. Press the Source softkey to select the channel that is connected to the LIN
signal.
6. Press the Threshold softkey and set the LIN signal’s threshold voltage level by
Universal Knob. The threshold voltage level is for decoding, and it will be
regard as the trigger voltage level when set the trigger type to serial.
7. Press the softkey to return previous menu.
8. Press the Configure softkey to enter the BUS CONFIG menu.
9. Press the Baud softkey to set baud rate.
The baud rate can be set as predefined value.
If the desired baud rate is not listed, select Custom option, press the
Custom and turn the Universal Knob to set the desired baud rate.
Loading ...
Loading ...
Loading ...