Hikvision DS-K5671-ZU User Manual

Loading ...

Set the door unlocking duraon. If the door is not opened for

the set me, the door will be locked.

Door Open Timeout Alarm

An alarm will be triggered if the door has not been closed

within the congured me duraon.

Door Magnec Sensor Type

You can set the door contact as Remain Open or Remain

Closed according to your actual needs. By default, it is Remain

Closed.

Exit Buon Type

You can set the exit buon as Remain Open or Remain Closed

according to your actual needs. By default, it is Remain Open.

Door Lock Powering O Status

You can set the door lock status when the door lock is

powering o. By default, it is Remain Closed.

Extended Open Duraon

The door contact can be enabled with appropriate delay aer

person with extended access needs swipes her/his card.

Door Remain Open Duraon with First Person

Set the door open duraon when rst person is in. Aer the

rst person is authorized, it allows mulple persons access the

door or other authencaon acons.

Duress Code

The door can open by inpung the duress code when there is

duress. At the same me, the client can report the duress

event.

Super Password

The specic person can open the door by inpung the super

password.

Note

The duress code and the super code should be dierent.

Set RS-485 Parameters

You can set the RS-485 parameters including the peripheral,

address, baud rate, etc.

Click Conguraon → Access Control → RS-485 Sengs .

Check Enable RS-485, and set the parameters.

Click Save to save the sengs aer the conguraon.

No.

Set the RS-485 No.

Peripheral Type

Select a peripheral from the drop-down list according the

actual situaon. You can select from Card Reader, Extension

Module, Access Controller, or Disable.

Note

Aer the peripheral is changed and saved, the device will

reboot automacally.

RS-485 Address

Loading ...

Hikvision DS-K5671-ZU Face Recognition Module For Turnstile

User Manual - Page 80