Hikvision DS-K5671-ZU User Manual

Loading ...

You can connect the RS-485 terminal with the RS-485 card reader,

connect the NC and COM terminal with the door lock, connect

the SENSOR terminal with the door contact, the BTN/GND

terminal with the exit buon, connect the alarm output and input

terminal with the alarm output/input devices, and connect the

Wiegand terminal with the Wiegand card reader or the access

controller.

If connect the WIEGAND terminal with the access controller, the

face recognion terminal can transmit the authencaon

informaon to the access controller and the access controller can

judge whether to open the door or not.

Note

●

If cable size is 18 AWG, you should use a 12 V power supply.

And the distance between the power supply and the device

should be no more than 20 m.

●

If the cable size is 15 AWG, you should use a 12 V power

supply. And the distance between the power supply and the

device should be no more than 30 m.

●

If the cable size is 12 AWG, you should use a 12 V power

supply. And the distance between the power supply and the

device should be no more than 40 m.

4.1 Terminal Descripon

The terminals contains power input, alarm input, alarm output,

RS-485, Wiegand output, and door lock.

The terminal's diagram is as follows:

Figure 4-1 Terminal Diagram

The descripons of the terminals are as follows:

Loading ...

Hikvision DS-K5671-ZU Face Recognition Module For Turnstile