Hikvision DS-K5671-ZU User Manual

Loading ...

3. Click Restore Default Sengs to restore the parameters to the

default sengs.

9.6.10 Alarm Sengs

Set the alarm output parameters.

Steps

1. Click Conguraon → Event → Alarm Sengs → Alarm

Output .

2. Set Alarm Name and Output Delay.

9.6.11 Access Control Sengs

Set Authencaon Parameters

Click Conguraon → Access Control → Authencaon Sengs .

Note

The funcons vary according to dierent models. Refers to the

actual device for details.

Click Save to save the sengs aer the conguraon.

If select Terminal 1:

Terminal/Terminal Type/Terminal Model

Select terminal and get the terminal descripon. They are

read-only.

Enable Authencaon Device

Enable the authencaon funcon.

Authencaon

Select an authencaon mode according to your actual needs

from the drop-down list.

Recognion Interval

You can set the interval between 2 connuous recognion of a

same person during the authencaon. In the congured

interval, Person A can only recognized once. If another person

(Person B) has recognized during the interval, Person A can

recognized again.

Authencaon Interval

You can set the authencaon interval of the same person

when authencang. The same person can only authencate

once in the congured interval. A second authencaon will be

failed.

Alarm of Max. Failed Aempts

Enable to report alarm when the card reading aempts reach

the set value.

Tampering Detecon

Enable the an-tamper detecon for the card reader.

Card No. Reversing

The read card No. will be in reverse sequence aer enabling

the funcon.

If select Terminal 2:

Terminal/Terminal Type/Terminal Model

Select terminal and get the terminal descripon. They are

read-only.

Loading ...

Hikvision DS-K5671-ZU Face Recognition Module For Turnstile

User Manual - Page 78