Loading ...
Loading ...
Loading ...
Figure 3-11 Install Bracket on Turnsle
3. Oponal: By default, a decoraon sheet is on the bracket. You
can replace it by the arch shaped decoraon (supplied) when
the default one cannot cover all holes on the turnsle.
1) Remove the 2 screws on the lower side of the bracket and
remove the decoraon sheet.
Figure 3-12 Remove Screws
2) Align the screw holes on the arch shaped decoraon with
the those on the bracket and secure them with 2 screws.
Figure 3-13 Arch Shaped Decoraon
4. Rotate to adjust the bracket's angle and secure the bracket on
the turnsle with 2 screws.
8
Loading ...
Loading ...
Loading ...