Loading ...
Loading ...
Loading ...
UTD1000L Us er M anual
To measure DC current lower than 400mA do the
followin
g
1 Press I button to set measurement type to D
C
Current
2. Press F3 button to select mA range, and
measurement unit will be m
A
3. Plug test lead connectors into input terminals
(Black to COM and Red to m
A
4 Connect test leads to tested points then take
DC cur ren t read in
g
Figure 5-8 Measuring DC Current lower than 400m
A
To measure DC current greater than 400mA do the
foll owin
g
1 Press I b utton to se measurement type to DC
Current
2 Press F3 button to select A range, the
measurement unit will change into A accordingly
.
3 Plug10A Current divider module UT-M0
7
into input terminalsCOM and mA the
n
connect black and red test lead connectors
respectively to the module UT-M0
7
4 Connect test leads to tested points than take
the DC current reading
If test leads are connected t o COM
and without use of 10A Current divider
module UT-M07 when measuring current
greater than 400mA, the fuse in the product will be
burnt out. Please have the fuse replaced b
y
qualified personnel if the incident happens
ȝA ȝ
A
ȝA/m
A
Warnin
g
Loading ...
Loading ...
Loading ...