Loading ...
Loading ...
Loading ...
11
7.4. Functionsettings
7.4.1. Bywiredremotecontroller
1
(Fig.7-11)
• Select“Service”fromtheMainmenu,andpressthe[SELECT]button.
• Select“Functionsetting”withthe[F1]or[F2]button,andpressthe[SELECT]
button.
2
(Fig.7-12)
• Settheindoorunitrefrigerantaddressesandunitnumberswiththe[F1]
through [F4]buttons,andthenpressthe[SELECT]buttontoconrmthecur-
rent setting.
<CheckingtheIndoorunitNo.>
Whenthe [SELECT]buttonispressed,thetargetindoorunitwillstartfanopera-
tion.Iftheunitiscommonor whenrunning allunits, allindoorunitsforthese-
lected refrigerant address will start fan operation.
3
(Fig.7-13)
• Whendatacollectionfrom theindoor unitsis completed,the currentsettings
appears highlighted. Non-highlighteditems indicate that no function settings
aremade.Screenappearancevariesdependingonthe“UnitNo.”setting.
4
(Fig.7-14)
• Usethe[F1] or [F2]buttontomovethecursortoselectthemodenumber,and
change the setting number with the [F3] or [F4] button.
5
(Fig.7-15)
• Whenthesettingsarecompleted,pressthe[SELECT]buttontosendtheset-
ting data from the remote controller to the indoor units.
• Whenthetransmissionissuccessfullycompleted,thescreenwillreturntothe
Function setting screen.
7. Electricalwork
F1 F2 F3 F4
Service menu
Cursor
Main menu:
Test run
Input maintenance info.
Function setting
Check
Self check
F1 F2 F3 F4
Function setting
Cursor Address
Monitor:
Ref. address
Unit No.
Grp./1/2/3/4/All
Fig.7-11
Fig.7-13
Fig.7-12
Fig.7-14
F1 F2 F3 F4
Function setting
Cursor Cursor
Request:
Ref. address
Mode 1
Mode 2
Mode 3
Mode 4
Grp.
F1 F2 F3 F4
Function setting
Cursor Cursor
Request:
Ref. address
Mode 7
Mode 8
Mode 9
Mode 10
Unit # 1
Fig.7-16
Fig.7-18
Fig.7-17
Fig.7-19
F1 F2 F3 F4
Function setting
Ref. address
Sending data
Fig.7-15
7.4.2. Bywirelessremotecontroller(Fig.7-16,Fig.7-17,Fig.7-18,Fig.
7-19)
1 Going to the function select mode
Pressthe
button between of 5 seconds.
(Startthis operation from the status of remote controller display turned off.)
[CHECK]islightedand"00"blinks.(Fig.7-16)
Pressthe
buttontosetthe"50".
Directthewirelessremotecontrollertoward thereceiver ofthe indoorunit and
press the
button.
2 Setting the unit number
Pressthe
button to set unit number A.(Fig.7-17)
Directthewirelessremotecontrollertoward thereceiver ofthe indoorunit and
press the
button.
3 Select a mode
Pressthe
buttontosetModenumberB.(Fig.7-18)
Directthewirelessremotecontrollertoward thereceiver ofthe indoorunit and
press the
button.
Currentsettingnumber: 1=1beep(1second)
2=2beep(1secondeach)
3=3beep(1secondeach)
4 Selecting the setting number
Usethe
button to change the Setting number C.(Fig.7-19)
Directthewirelessremotecontrollertoward thereceiver ofthe indoorunit and
press the
button.
5 To select multiple functions continuously
Repeat select 3 and 4 to change multiple function settings continuously.
6 Complete function selection
Direct the wireless remote controller toward the sensor of the indoor unit and press
the
button.
Note:
MaketheabovesettingsonMr.Slimunitsasnecessary.
• Table1summarizesthesettingoptionsforeachmodenumber.
• Besuretowritedownthesettingsforallfunctionsifanyoftheinitialsettings
hasbeenchangedafterthecompletionofinstallationwork.
A
B
C
Loading ...
Loading ...
Loading ...