Loading ...
Loading ...
Loading ...
14
Troubleshooting
Display shows Error Codes 1-4 and E9.
• Unit is malfunctioning; visit
proctorsilex.com.
Display shows LID and Pressure Cooker
is beeping.
• Lid is not on correctly. Remove Lid and
align Lid with arrows to ensure Lid is
seated properly.
• Lid is on and you are in SAUTÉ mode.
Remove Lid and set aside. Do not use
Lid while in SAUTÉ mode.
Cooker will not turn on.
• Make sure outlet is functioning properly.
Lid is difficult to close.
• Make sure Gasket is inserted properly
in the underside of Lid.
• If Cooker has been used to Sauté or is
still warm from previous cooking, there
may be a small amount of pressure in
Cooker. Move Steam Release Valve to
open (
) position, close Lid and then
move Valve to closed ( ) position.
Lid will not lock.
• Gasket is not installed properly.
• Debris may be blocking Gasket or
Valves. Make sure all are clean and free
of food.
Steam is escaping from Cooker during
cooking.
• It is normal for some steam to come
out of Float Valve and Steam Release
Valve until Pressure Cooker comes to
pressure and Lid is locked.
• Ensure Steam Release Valve is in
closed ( ) position.
• Lid may not be closed and locked
properly.
• Gasket may not be inserted properly or
needs to be replaced.
• Valves or Gasket may need to be
cleaned to remove debris. See “Care
and Cleaning.”
Lid cannot be removed.
• Pressure must be completely released
before Lid is unlocked. See “Releasing
Steam” instructions in “Meet Your
Pressure Cooker.”
Spattering occurs when steam is
released.
• Cooking Pot may be overfilled. Fill no
more than 2/3 full, or 1/2 full for foods
that expand, such as rice and beans.
• If spattering occurs, wear an oven mitt
to protect hand and release pressure in
short bursts or allow to natural release.
Cooker takes too long to come to
pressure.
• Amount of time to bring to pressure
depends on amount of liquid and food
in Cooking Pot. Starting temperature of
food may also extend time.
Loading ...
Loading ...
Loading ...