Loading ...
Loading ...
Loading ...
6
AXIS Q6034 - Product Description
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the
camera’s IP51 rating, see
Multi-Connector Cable (not included),
on page 42.
SDHC card slot - A standard or high capacity SD memory card (not included) can be used for local recording with removable
storage. To insert and remove an SD card, the camera’s top cover must first be removed; for instructions please refer to the
Installation Guide.
Note:
Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to
Setup > System Options > Storage > SD Card and click Unmount.
Status LED indicator
After the startup and self test routines the Status indicator flashes as follows
See also
LED Indicator flash routine,
on page 48.
AXIS T8123 LED indicators
After the startup and self test routines the Status indicator flashes as follows
Color Description
Unlit Steady during connection and normal operation
Amber Steady during system initialization and reset to factory default. Flashes during
firmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable or lost
Red Flashes red for firmware upgrade failure
Green Shows steady green for 10 seconds for normal operation after restart
LED Color Description
Port Unlit No camera connected
Flashing Power overload or other input voltage error
Green Camera connected, normal behavior
AC input Steady green AC power connected
Loading ...
Loading ...
Loading ...