Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
You are ironing before the
iron gets ready
Wait until the iron is ready (the light on the
display panel stops ashing).
Dirty water
and impurities
come out of the
soleplate during
ironing.
Hard water with impurities
or chemicals has formed
akes inside the soleplate.
Perform Quick Calc Release (specic types only)
or Calc-Clean (specic types only).
See chapter “Cleaning and maintenance”.
There is an amber
light ashing on
the handle of the
iron.
The Calc-Clean reminder
light is activated. This is
to remind you to perform
Calc-Clean.
Perform Quick Calc Release (specic types only)
or Calc-Clean (specic types only).
See chapter “Cleaning and maintenance”.
The iron leaves a
shine or an imprint
on the garment.
The surface to be ironed
was uneven, for instance
because you ironed over
a seam or a fold in the
garment.
The iron is safe to use on all ironable garments.
The shine or imprint is not permanent and
disappears when you wash the garment. Avoid
ironing over seams or folds. You can also place a
cotton cloth over the area to be ironed to avoid
imprints.
The iron makes a
lot of noise.
There is no water in the
appliance.
Fill the water in the water tank.
11
English
Loading ...
Loading ...
Loading ...