Loading ...
Loading ...
Loading ...
• When rewinding heavyweight paper, use strong adhesive tape to fasten it. Otherwise, a
rewinding problem may result.
• If you use a paper core narrower than the paper to be wound, adjust the position of the
holder stopper, so that there is a gap between the holder stopper and the paper.
5. Make sure the leading edge of the roll paper is not lifting up from the paper core, and if there
are places lifting up, tape in additional places so that the paper does not lift up.
6.
Push roll holder downward, check that roll holder is not lifting up, and tap OK.
â—¦
Outward Winding
â—¦ Inward Winding
Important
•
If the roll holder lifts up, it may cause an error.
7.
To stabilize operations when starting taking up, advance roll paper with operation panel and
wind roll paper approximately one revolution. (See "Feeding Roll Paper Manually.")
8.
Push roll holder downward again, and check that roll holder is not lifting up.
The winding preparation is complete. When printing to the roll starts, the roll paper can be
automatically wound.
•
If Ready to print appears on touch screen
1.
Manually advance roll paper (See "Feeding Roll Paper Manually.") or start printing, and wait
for leading edge of roll paper to reach roll unit.
2.
Hold center of leading edge of roll paper, align right edge of take-up spool paper core's right
edge and tape center to paper core while pulling on roll paper evenly.
136
Loading ...
Loading ...
Loading ...