Loading ...
Loading ...
Loading ...
2.
Select Laser Optical Axis Adjustment from the drop-down list.
3.
Check Enable Laser Optical Axis Adjustment.
4.
Adjust the optical zoom ratio to the maximum value via PTZ control panel.
5.
Click the direction buttons to adjust the position of laser.
6.
Adjust the sensitivity. The higher the value is , the faster the cursor moves.
7.
Click Save when the laser point is in the center of live view.
8.
Go to Conî´ªguration > Image > Display Settings > Image Enhancement to set the laser
compensation region.
9.
Adjust the level of laser compensation.
Caution
The laser radiation emitted from the device can cause eye injuries, burning of skin or
inî´«ammable substances. Before enabling laser lighting supplement, make sure no
human or inî´«ammable substances are in front of the laser lens.
12.5.7 BLC
If you focus on an object against strong backlight, the object will be too dark to be seen
clearly. BLC (backlight compensation) compensates light to the object in the front to make
it clear. If BLC mode is set as Custom, you can draw a red rectangle on the live view image
as the BLC area.
12.5.8 WDR
The WDR (Wide Dynamic Range) function helps the camera provide clear images in
environment with strong illumination differences.
When there are both very bright and very dark areas simultaneously in the î´ªeld of view, you
can enable the WDR function and set the level. WDR automatically balances the brightness
level of the whole image and provides clear images with more details.
Note
When WDR is enabled, some other functions may be not supported. Refer to the actual
interface for details.
12.5.9 White Balance
White balance is the white rendition function of the camera. It is used to adjust the color
temperature according to the environment.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
81
Loading ...
Loading ...
Loading ...