Loading ...
Loading ...
Loading ...
Note
Tuning mode is to display the information that helps debugging the function. This mode
is reserved for technical support.
3.
Set the Tracking Duration.
The device stops tracking when it tracks a target uninterruptedly for the set duration.
4.
Set the zooming control and other tracking parameters.
Zooming Control
Two modes are available. Controlled by target frame or by tilt angle of the device.
By Tilt Angle
The device calculates the tracking zoom ratio automatically according to the tilt
angle of the device.
Note
The attitude of the device affects the accuracy of this zooming control mode. For
the model with a built-in gyroscope, try to calibrate the attitude if some zooming
problems happen during tracking. See
Set Device Position
for instructions.
By Target Frame
The tracked target has a virtual frame around. The device calculates a suitable
zoom ratio according to the frame and the set Tracking Zoom Ratio. Larger value
means bigger zoom ratio.
Wait to Stop Tracking If Low Validity
The validity is an internal parameter that helps judge whether the device should keep
tracking or not. This parameter is the waiting time level before the device stops
tracking when the validity is low. Larger value means longer waiting time.
Wait to Lower Tracking Speed If Low Validity
The validity is an internal parameter that helps judge whether the PTZ channel should
lower the tracking speed or not. This parameter is the waiting time level before the
device lowers the tracking speed when the validity is low. Larger value means longer
waiting time.
5.
Optional: Click Default to restore the smart tracking parameters to default settings.
6.
Click Save.
10.16 Set Smart Tracking
You can conî´ªgure the function to link the camera with the radar for more accurate and
higher speed target detecting and tracking.
Steps
1.
Select the camera channel from the drop-down list.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
62
Loading ...
Loading ...
Loading ...