Loading ...
Loading ...
Loading ...
15.11.1 Synchronize Time Manually
Steps
1.
Go to Conî´ªguration > System > System Settings > Time Settings .
2.
Select Time Zone.
3.
Click Manual Time Sync..
4.
Choose one time synchronization method.
-
Select
Set Time, and manually input or select date and time from the pop-up calendar.
-
Check
Sync. with computer time to synchronize the time of the device with that of the
local PC.
5.
Click Save.
15.11.2 Set NTP Server
You can use NTP server when accurate and reliable time source is required.
Before You Start
Set up a NTP server or obtain NTP server information.
Steps
1.
Go to Conî´ªguration > System > System Settings > Time Settings .
2.
Select Time Zone.
3.
Click NTP.
4.
Set Server Address, NTP Port and Interval.
Note
Server Address is NTP server IP address.
5.
Click Test to test server connection.
6.
Click Save.
15.11.3 Set DST
If the region where the device is located adopts Daylight Saving Time (DST), you can set
this function.
Steps
1.
Go to Conî´ªguration > System > System Settings > DST .
2.
Check Enable DST.
3.
Select Start Time, End Time and DST Bias.
4.
Click Save.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
109
Loading ...
Loading ...
Loading ...