Loading ...
Loading ...
Loading ...
15.12 Set RS-232
RS-232 can be used to debug device or access peripheral device. RS-232 can realize
communication between the device and computer or terminal when the communication
distance is short.
Before You Start
Connect the device to computer or terminal with RS-232 cable.
Steps
1.
Go to Conî´ªguration > System > System Settings > RS-232 .
2.
Set RS-232 parameters to match the device with computer or terminal.
3.
Click Save.
15.13 Set RS-485
RS-485 is used to connect the device to external device. You can use RS-485 to transmit
the data between the device and the computer or terminal when the communication
distance is too long.
Before You Start
Connect the device and computer or terminal with RS-485 cable.
Steps
1.
Go to Conî´ªguration > System > System Settings > RS-485 .
2.
Set the RS-485 parameters.
Note
You should keep the parameters of the device and the computer or terminal the same.
3.
Click Save.
Note
The settings take effect only for the PTZ channel.
15.14 Set Same Unit
Set the same temperature unit and distance unit. When you enable this function, the unit
cannot be conî´ªgured separately in other setting pages
Steps
1.
Go to Conî´ªguration > System > System Settings > Unit Settings .
2.
Check Use Same Unit.
3.
Set the temperature unit and distance unit.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
110
Loading ...
Loading ...
Loading ...