Loading ...
Loading ...
Loading ...
14.3.2 Set Manual Port Mapping
Steps
1.
Check Enable UPnPâ„¢, and choose a friendly name for the device, or you can use the
default name.
2.
Select the port mapping mode to Manual, and set the external port to be the same as the
internal port.
3.
Click Save.
What to do next
Go to the router port mapping settings interface and set the port number and IP address to
be the same as those on the device. For more information, refer to the router user manual.
14.4 Multicast
Multicast is group communication where data transmission is addressed to a group of
destination devices simultaneously.
Go to
Conî´ªguration > Network > Basic Settings > Multicast for the multicast settings.
For a device with more than one channel, multicast can be set independently for each
channel.
IP Address
It stands for the address of multicast host.
Stream Type
The stream type as the multicast source.
Video Port
The video port of the selected stream.
Audio Port
The audio port of the selected stream.
14.5 SNMP
You can set the SNMP network management protocol to get the alarm event and exception
messages in network transmission.
Before You Start
Before setting the SNMP, you should download the SNMP software and manage to receive
the device information via SNMP port.
Steps
1.
Go to the settings page: Conî´ªguration > Network > Advanced Settings > SNMP .
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
99
Loading ...
Loading ...
Loading ...