Loading ...
Loading ...
Loading ...
2.
Click Calibrate to synchronize the north of the device with that of the e-compass.
10.13 Set Power Off Memory
This function can resume the previous PTZ status of device after it restarting from a
power-off.
Steps
1.
Go to Conî´ªguration > PTZ > Basic Settings .
2.
Select Resume Time Point. When the device stays at one position for the set resume
time point or more, the position is saved as a memory point. The device returns to the
last memory point when it restarts.
3.
Click Save.
10.14 Set PTZ Priority
The function can set the PTZ priority of different signals.
Steps
1.
Go to Conî´ªguration > PTZ > Prioritize PTZ .
2.
Set the priority signal and delayed time.
Network
The network signal controls the device with priority.
RS-485
The RS-485 signal controls the device with priority.
Delay
It refers to the time interval of PTZ operation controlled by different signals. When the
operation with high priority is î´ªnished, the low priority signal controls the device after
the setting interval.
3.
Click Save.
10.15 Set Tracking Parameters
Adjust the motion parameters of the device for better target tracking performance.
Steps
1.
Go to VCA > Set Application > Smart Event > Advanced Settings .
2.
Optional: Check Tuning Mode.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
61
Loading ...
Loading ...
Loading ...