Loading ...
Loading ...
Loading ...
9.2.2 FTP/NAS/Memory Card Uploading
If you have enabled and congured the FTP/NAS/memory card uploading, the device
sends the alarm information to the FTP server, network attached storage and memory card
when an alarm is triggered.
Refer to
Set FTP
to set the FTP server.
Refer to
Set NAS
for NAS conguration.
Refer to
Set Memory Card
for memory card storage conguration.
9.2.3 Send Email
Check Send Email, and the device sends an email to the designated addresses with alarm
information when an alarm event is detected.
For email settings, refer to
Set Email
.
Set Email
When the email is congured and Send Email is enabled as a linkage method, the device
sends an email notication to all designated receivers if an alarm event is detected.
Before You Start
Set the DNS server before using the Email function. Go to
Conguration > Network > Basic
Settings > TCP/IP for DNS settings.
Steps
1.
Go to email settings page: Conguration > Network > Advanced Settings > Email .
2.
Set email parameters.
1)Input the sender's email information, including the Sender's Address, SMTP Server,
and SMTP Port.
2)Optional: If your email server requires authentication, check Authentication and input
your user name and password to log in to the server.
3)Set the E-mail Encryption.
●
When you select SSL or TLS, and disable STARTTLS, emails are sent after encrypted
by SSL or TLS. The SMTP port should be set as 465.
●
When you select SSL or TLS and Enable STARTTLS, emails are sent after encrypted
by STARTTLS, and the SMTP port should be set as 25.
Note
If you want to use STARTTLS, make sure that the protocol is supported by your
email server. If you check the Enable STARTTLS while the protocol is not supported
by your email sever, your email is sent with no encryption.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
48
Loading ...
Loading ...
Loading ...