Loading ...
Loading ...
Loading ...
42
If Group control is NOT selected from Trigger Control options, then the illuminator
will not respond to any Group commands.
If Group Control is selected from Trigger Control options, then the user can select
two modes of operation in response to Group Commands:
1. Yes, Send & Receive
The illuminator will both originate group commands based
on the trigger AND respond to group commands from
other illuminators in its group.
2. Yes, Receive only
The illuminator will only respond to group commands
from other illuminators in its group but it will NOT
originate any group commands.
Factory Defaults: Photocell No, ignore group commands
External Input No, ignore group commands
Some examples of illuminator functionality in a group:
• All illuminators can come on at the same time and go off at the same time by
either Photocell or Ext input control from a single illuminator
• The Group Override function on the Home Page allows the user to take instant
control of the group of illuminators all at the same time
Lamp Mode On Trigger
This dictates the status of the illuminator on receipt of a valid instruction from
Photocell and/or External Input. For both the Photocell and the External Input, the
illuminator can either be programmed to stay off or to turn on.
In addition, the External Input can activate the Deter mode – which can be configured
below.
Loading ...
Loading ...
Loading ...