Loading ...
Loading ...
Loading ...
35
The Home Page / Manual Override Page displays the current status of the
illuminators including the following information:
- A visual representation of the product and its current state (ON or OFF)
- Product Type & Model
- Product Name - if a name has been assigned (using Network Page or Raytec
Discovery Tool)
- Group Name - if a name has been assigned (using Settings / Group Page or
Raytec Discovery Tool)
- Trig – if illuminator is on, this will indicate the type of input trigger
- Status – LED indicator will indicate if the illuminator is healthy (green LED) or if
there is potentially an issue with the illuminator (amber LED)
Home Page / Manual Override
All users can access Manual Override features shown below by selecting the
Override
button.
When selected, additional features will appear and Manual Override countdown will
commence. Factory default Manual Override countdown is 30 minutes. This setting
can be adjusted by the administrator on the“Adv. Settings” Page. The countdown
duration can be reset at any time and will restart from maximum time. The Manual
Override function can be deselected at any time and the illuminator will return to
normal operating mode.
On & Group On
The current ON / OFF status will be displayed by the red / green button together with
the current power level of the illuminator. Use the slider bar to change the power
level.
To turn all illuminators ON in the same group and control power level – select the
Group ON
button.
All illuminators in a group will turn on to the power setting selected.
When
ON
or
GROUP ON
button is turned OFF, illuminators will return to their
normal operating mode.
Loading ...
Loading ...
Loading ...