Loading ...
Loading ...
Loading ...
PL5 Series Fiber Laser Marking System Page 38 of 40
6 MAINTENANCE
6.1 General Notes
In prior to any operation, the user should read this instructions carefully. The laser system is designed
such that maintenance can be performed safely.
In order to achieve the best printing results and prevent damage, the maintenance of the laser system is
very important. It is necessary to establish a maintenance schedule for the laser marking system
considering the working intensity of the equipment and the characteristics of the printed products.
CAUTION
The laser marking system must only be installed and operated by authorised
and specifically trained personnel only.
WARNING
Before performing any maintenance on the laser marking system, ensure
that the system is completely shut down by disconnecting from the power
supply.
6.2 Maintence Procedures
6.2.1 General Maintence Procesures
1. Cut off the main power.
2. Clean the lens when finish using the laser marking system and then cover the lens cover.
Remove dust on the surface of the lens by blowing air with a rubber squeeze bulb. If the lens is
dirt and dusty, clean the lens by folloing section 6.2.2.
CAUTION
The lens of the laser machine should be guaranteed to avoid smoke, dust,
water, oil, scratches and touch. Keep it clean at all times.
3. Clean up the dust accumulated on the air vents on the surface of the machine housing weekly.
4. If the system is not turned on for a long time, it must be powered off, and cover the laser head
and control box with a cover cloth to avoid dust accumulation and moisture-proof.
6.2.2 Clean the Lens
WARNING
Ensure that the system is completely shut down by disconnecting from the
power supply.
Loading ...
Loading ...