Loading ...
Loading ...
Loading ...
PL5 Series Fiber Laser Marking System Page 13 of 40
The equipment must be handling appropriately and carefully.
The laser head must not be held by the scanner head or by the supply lines.
The control unit is to be specifically protected during assemlbly.
4.3.3 Storage
Store the laser system in a horizontal position and protected against dust and humidity.
Never expose the laser system or one of its components to direct sunlight!
The following conditions are necessary for operation and storage of the laser marking system:
Temperature +5°C to +40°C
90% max relative humidity - non-condensing
4.4 Air Cooling
Phezer PL5 Series Handheld Fiber Laser Marking Systems are cooled by air. The internal cooling system is
designed to supply sufficient cooling.
Make sure that the cooling air can be sucked in and blown out freely and that there is sufficient air
exchange at the installation site to ensure heat dissipation.
CAUTION
Keep the air inlet and outlet clean, otherwise it will affect the working
efficiency of the laser.
Loading ...
Loading ...
Loading ...