Loading ...
Loading ...
Loading ...
PL5 Series Fiber Laser Marking System Page 33 of 40
Process:
1. First enter the "working Scope" , and click the "Y" radio button.
2. Click the "enable" button.
3. Go back to the home screen to refresh then come back.
4. Click the "laser test" button and the machine will print a ‘田’shape.
5. Put the ‘
田
’shape just printed in the same direction as the ‘
田
’shape in software.
6. Take the center of the crosshair as the zero point and measure the actual positions of the
8 points, then enter the value. The point numbers are shown below. (point 5 is never
change)
7. Click "Correction" button and type "laser" in the pop-up window to save the correction.
5.3.5 Setting
Loading ...
Loading ...
Loading ...