Loading ...
Loading ...
Loading ...
PL5 Series Fiber Laser Marking System Page 12 of 40
4 INSTALLATION
4.1 Unpacking and Inspection
Before unpacking, inspect the shipping carton for evidence of rough handling, and note any damage. If
you discover shipping damage to the laser, document the damage with a photograph, then immediately
inform the shipping carrier and Phezer.
After unpacking, review the shipping contents listed below to ensure all components are received.
Saving all of the laser’s original packaging in case of relocation or shipping .
Protect the laser system and all components from dust and humidity until installation.
CAUTION
The laser marking system must only be installed and operated by authorised
and specifically trained personnel only.
The installation of the laser marking system has to comply to IEC 60825-1.
4.2 Shipping Contents
Each PL5 Series fiber laser marking system shipment contains the following items:
1 ea x Laser Marking Head
1 ea x Control Box
1 ea x Took Kits and Bolts
1 ea x Network Card
1 ea x Screen Protective Cover
1 ea x U disk
1 ea x Touch Pencil
2 ea x White Plastic Cover
1 ea x Protective Glasses
4.3 Transport, Handling and Storage
4.3.1 Transport
Switch off the laser system before transport and disconnect mains connection!
Please make sure that the supply line connecting marking unit and supply unit is not bent!
Do not use the umbilical to carry the laser system!
CAUTION
The laser system is a precision-made instrument and includes numerous
electronic and optical components. Please avoid any mechanical stress
(shock, vibrations, etc.) on the laser system!
4.3.2 Handling
Loading ...
Loading ...
Loading ...