Loading ...
Loading ...
Loading ...
PL5 Series Fiber Laser Marking System Page 28 of 40
9. Properties And Parameters
Select on the home screen
Laser Power - Unit: %
Set the percentage for the optical output of the fiber laser.The power range is 0% -100%.
However, do not set 100%, it will shorten the lifetime of laser source. Maximum value is better
to set to 95%. The initial value is set to 30%. The greater the value, the deeper the marking.
Laser Frequency - Unit: KHz
It’s pulse frequency, the value range is 1KHz - 100KHz.
The initial value is set to 20 KHz.
Run Speed - Unit: mm/s
Set the speed to be used during marking, the speed range is 1-5000mm/s.
If the mark appears to be faint, reduce this value (note that this will increase the marking time).
Jump Speed - Unit: mm/s.
Loading ...
Loading ...
Loading ...