Loading ...
Loading ...
Loading ...
23
MAKING ADJUSTMENTS
RIVING KNIFE ALIGNMENT
WITH THE BLADE
This procedure requires a the supplied 4mm T-handle Allen Wrench
HP21
and straight edge ruler. See Figure 30.
Completely disconnect saw from power source
before making any adjustments.
1. Carefully remove throat plate.
2. Loosen the two hex-head screws
A
shown in Figure 28.
3. Using a straight edge ruler, align riving knife with blade
body, see Figure 29.
4. Tighten the two hex-head screws
A
, see Figure 28.
5. To adjust parallel alignment use the two set screws
B
,
see Figure 28. Clockwise: adjust riving knife to the right.
Counter-clockwise: adjust riving knife to the left. If needed,
use the set screws to align the riving knife with blade face
and the square.
6. Fully tighten the two hex-head cap screws.
7. Replace throat plate, blade guard and anti-kickback
assemblies before use.
If any dragging or binding of the workpiece
is encountered as it reaches the riving knife, turn unit o
and disconnect machine from power source and readjust
the riving knife/blade alignment or replace the blade.
NEVER attempt to back partially-cut workpiece out of
blade while blade is moving.
Figure 28
Figure 29 Figure 30
A B
HP21
NOTE: Scan QR code or visit us at https://youtu.be/FDQxRbmFxPs
to see Riving Knife Alignment with the Blade video instructions.
Loading ...
Loading ...
Loading ...