HELMET COOLING BAG
MODEL NO: MS0816
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
Original Language Version
© Jack Sealey Limited
1. SAFETY
ELECTRICAL SAFETY FOR USE OF CHARGER.
9 Use only the supplied USB cable for connecting the helmet cooling bag to its power supply.
WARNING! It is the user’s responsibility to read, understand and comply with the following instructions.
9 Ensure that you inspect the USB cable and connections for wear and damage to ensure items are safe before connecting
them. If worn or damaged DO NOT use.
WARNING! There are no user serviceable components. DO NOT dismantle.
WARNING! For indoor use only.
8 DO NOT pull USB socket by the lead.
8 DO NOT overll this helmet cooling bag; it should only be used for the designed purpose.
8 DO NOT locate in a position where items could fall causing accidental contact of the fan or damage. INTRODUCT
2. INTRODUCTION
An integral, quiet running fan will quickly and conveniently dry and cool your helmet whilst in the bag. Inhibiting the build-up of
damp and odour. Helps prevent the build-up of bacteria, so your helmet smells fresher. Improves the life span of the linings and impact
materials in your helmet. The unit comes with a USB adapter for connection to your vehicle or to a power pack. Making it ideal for rides
out, race/track days, as well as using at home after your ride out/commute. Made from a strong canvas, and the inner is fully lined to
best protect your equipment.
3. OPERATION
MS0816 Issue: 1 24/08/23
Handle
Shoulder strap
USB Connection
Zip to open / close
© Jack Sealey Limited Original Language Version
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
REGISTER YOUR
PURCHASE HERE
MS0816 Issue: 1 24/08/23
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
USB Cable storage
zipped compartment
USB Cable to connect to
power supply
Shoulder strap
Ventlation outlets
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
