Tripp Lite B020-U16-19-IP TAA Owner's Manual Console KVM Switch with IP Access B020-U08-19-IP, B020-U16-19-IP

Loading ...

7. Administration

(

continued

)

Working Mode

The Working Mode section allows you to enable/disable operation features of the KVM switch. The table below describes the available settings.

Setting Description

Enable ICMP When this box is checked, the KVM switch can be pinged. If it is not checked, the KVM cannot be pinged.

Enable Multiuser Operation When this box is checked, multiple accounts can log onto the same bus at the same time (see Bus Info section under Control

Panel in Remote Session Operation for details). If not selected, the KVM switch can only be simultaneously accessed by the

number of users the unit has buses for. B020-U08-19-IP and B020-U16-19-IP have 2 buses each (1 local, 1 remote).

Browser Service When this box is checked, browser access to the KVM switch can be limited by selecting one of the three options in the drop-

down menu.

• Disable Browser – Browser access is disabled completely.

• Disable HTTP – Browser access is permitted, but only when using a HTTPS URL.

• Disable HTTPS – Browser access is permitted, but only when using a HTTP URL.

Private Certificate

When logging into the KVM switch over a secure (SSL) connection, a certificate is required to ensure you are logging into a secure site. If a

certificate is not recognized as secure, you will be prompted each time you log in to verify you want to continue to the website. This section

allows you to import an Encryption Key and Certificate. To import an Encryption Key and Certificate, follow the steps below.

1. Click the Browse button to the right of Private Key, browse to where your private encryption key file is located, and then select it.

2. Click the Browse button to the right of Certificate, browse to where your certificate file is located, and then select it.

3. Click the Upload button to complete the procedure.

Note: Both the Private Key and Certificate must be imported at the same time. Clicking the Restore Default button returns the KVM to the

default certificate that came installed on it.

Certificate Signing Request

The Certificate Signing Request section provides an automated way of obtaining and installing a CA signed SSL server certificate. To perform

this operation, follow the steps below.

1. Click the Create CSR button. The following dialog box appears.

Loading ...

Tripp Lite B020-U16-19-IP TAA NetDirector 16-Port 1U Rack-Mount Console IP KVM Switch