Loading ...
Loading ...
Loading ...
18
6. KVM Operation
(
continued
)
6.5.3 AP Java Client Login
The Connection Screen
A description of the contents of the Connection Screen is given in the following table:
Item Description
Menu Bar The Menu Bar contains two menus; File and Help. The File Menu allows the operator to Create, Save, and Open Work files.
Server List Each time the WinClient.exe file is run, it searches the User’s LAN segment for B020-Series KVM Switches, and lists the ones it finds
in this box. Double-click on any of the units in this list to connect to it.
Note: For a switch to show up in the Server List, the Enable Device List check box in the Operating Mode page (see Operating Mode
section under Device Management in OSD Operation for details) must be checked and the Program service port in the Network page
(see Network section under Device Management in OSD Operation for details) must be set to the same number as in the AP Windows
Client Port field.
Server This area is used when you want to connect to a B020-Series KVM Switch at a remote location.
• Click on the IP drop-down and select an address from the list. If the address you want is not listed, key in the target IP address in
the IP field, and its port number in the Port field.
• When the IP address and port number have been specified, click Connect to bring up a login dialog box. Provide a Username and
Password as provided by your system administrator and click OK to establish a connection with the B020-Series KVM Switch.
• When you have finished with your session, click Disconnect to end the connection.
Message List Lists status messages regarding the connection to the B020-Series KVM Switch.
Switch to Remote View Once a remote connection with a B020-Series KVM Switch has been established, this button becomes active. Click it to switch to the
KVM Switch’s Main OSD Page.
The File Menu
The File Menu allows the operator to Create, Save, and Open Work Files. A Work File consists of all the information specified in a Client session.
This includes the items in the Server List and Server IP List.
Whenever a user runs the Client program, it opens with the values contained in the current Work File, i.e. the values that were in effect when the
program was last closed.
The File menu consists of three items:
Item Description
New Allows the user to create a named work file so that its values will not be lost and will be available for future use
Open Allows the user to open a previously saved work file and use the values contained in it
Save Allows the user to save the values presently in effect as the current work file
Exit Exits the AP Windows Client
In those cases in which the Administrator does not want the B020-
Series KVM Switch to be available via browser and the remote user is
not running Windows, the AP Java Client provides access to the KVM
switch.
After downloading the AP Java Client, go to the location on your hard
disk where you downloaded the program and double-click on it to
bring up the connection screen. The AP Java Client connection screen
is the same as the Windows version, except that it does not contain a
menu bar with File and Help menus.
Loading ...
Loading ...
Loading ...