Loading ...
Loading ...
3
1. FCC Information
2. User Notice
3. Package Contents
This is an FCC Class A product. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables
and connectors with this equipment. Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s
authority to operate this equipment.
All information, documentation, and specifications contained in this manual are subject to change without prior notification by the manufacturer.
The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer’s software described in this manual
is sold or licensed “as is.” Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or
its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in
the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is
the responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not
selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.
This package consists of:
• Console KVM Switch with Built-in IP
• 6 ft. USB/PS2 Combo KVM Cable Kits (x2)
• USB/PS2 Combo Console Cable Kit
• Grounding Wire
• RJ11 to DB9 Firmware Upgrade Cable
• Rack-Mount Hardware
• C13 to 5-15P Power Cord
• CD with Owner’s Manual and Device Files
Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your
dealer.
Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other
devices on the installation.
4.1 Overview
4. Introduction
The NetDirector Console KVM Switch with IP Access is a control unit
that allows secure access to multiple computers from a single KVM
(keyboard, video, and mouse) console. It consists of an integrated
LCD monitor, keyboard, and touchpad in a 1U rack-mountable
housing.
The NetDirector Console KVM Switch with IP Access features IP-based
connectivity that allows multiple remote operators to concurrently
monitor the computers on your installation. It uses TCP/IP for its
communications protocol, allowing it to be accessed from any
computer on the LAN, WAN, or Internet – whether that computer is
located down the hall, down the street, or halfway around the world.
Remote
Optional External Console
Loading ...
Loading ...
Loading ...