Loading ...
Loading ...
Loading ...
5
4.3.6 Operating Systems
Operating System Versions Supported
Windows 2000 and higher
Linux RedHat 7.1 and higher
Linux SuSE 9.0 and higher
Linux Mandriva (Mandrake) 9.0 and higher
UNIX AIX 4.3 and higher
Operating System Versions Supported
UNIX Free BSD 4.2 and higher
UNIX Sun Solaris 8 and higher
Novell Netware 5.0 and higher
Mac OS 9 and higher
DOS 6.22 and higher
Supported operating systems are shown in the table, below:
4. Introduction
(
continued
)
4.4 Components
1
Handle: Pull to slide the KVM module out; push to slide the KVM
module in. (See item 13.)
2
LCD Monitor: After sliding the KVM module out, flip up the cover
to access the LCD monitor.
3
LCD Controls: The LCD ON/OFF switch is located here, as well
as buttons to control the position and picture settings of the LCD
display.
4
Station/Port Switches: Press the Port ID Up/Down buttons to
switch to the port before/after the currently selected port. Press
the Station ID Up/Down buttons to switch to the station before/
after the currently selected station.
5
LEDs: The Online Port LEDs illuminate orange to indicate a
computer is connected and powered on. The Port ID LED will
display the number of the port that currently has the console’s
focus. The Station ID LED will display the number of the station
that currently has the console’s focus.
6
Keyboard
7
Touchpad
8
Power LED: The Power LED illuminates blue to indicate the unit is
receiving power.
9
Rack-Mount Tabs: The rack-mount tabs located at each corner
of the unit secure the chassis to a system rack.
10
Lock LEDs: The Num Lock, Caps Lock and Scroll Lock LEDs are
located here.
11
Reset Switch: Press this recessed switch in with a thin object to
perform a system reset.
12
Firmware Upgrade Section: The firmware upgrade cable that
transfers the firmware upgrade data from the administrator’s
computer to the console KVM switch connects to the port located
here. During normal operation, this switch should be in the
NORMAL position.
13
Slide Release: In order to bring the console out, you must first
release it by sliding these tabs to the inside.
14
External Mouse Port: An additional USB port is provided on the
front panel of the keyboard module for an option external mouse.
15
USB Peripheral Port: A USB 1.1 port is provided for the sharing
of USB peripherals among connected computers (e.g. flash drive,
CD-ROM drive, etc.).
4.4.1 Front View
2
3
4
6
7
8
9
5
10
11
12
13
1
14
15
Loading ...
Loading ...
Loading ...