Loading ...
Loading ...
Loading ...
29
7. Administration
(
continued
)
The settings in the F3 SET page are explained in the following table:
Setting Description
OSD HOTKEY
Select the hotkey sequence that invokes the OSD (both Local Console OSD and Remote OSD); [Scroll Lock, Scroll Lock] or
[Ctrl, Ctrl]. This is set to [Scroll Lock, Scroll Lock] by default.
PORT ID DISPLAY POSITION This setting allows you to position the Port ID anywhere on the screen. The default is the upper left corner. When selected,
the screen switches to the last selected port, and displays its Port ID. To position the Port ID, use the touchpad or the key-
board arrow keys, as well as the [Pg Up], [Pg Dn], [Home], [End], and [5] keys (on the numeric keypad with [Num Lock]
off). When the Port ID is in the desired location, double-click or press the [Enter] key to lock it in position and return to the
OSD.
Note: The Port ID is set independently for each port on the installation. The position specified here only applies to the port
that is currently active.
PORT ID DISPLAY DURATION This selection gives you the option of displaying the Port ID for 3 seconds, or having the Port ID always off. The default is to
display for 3 seconds.
PORT ID DISPLAY MODE Select how the Port ID is displayed: Port Number only, Port Name only or both Port Number and Port Name. The default is to
display both Port Number and Port Name.
SCAN DURATION This setting determines the amount of time spent on each port when in Auto Scan Mode. Key in a value from 1 - 255
seconds, and then press the [Enter] key. The default is 5 seconds; a setting of 0 (zero) disables the Auto Scan function
altogether.
SCAN/SKIP MODE Select which ports will be accessed during Auto Scan Mode and Skip Mode.
• ALL : All ports that are accessible to the currently logged-on user
• POWERED ON: All ports that are both accessible to the currently logged in user and powered-on
• QUICK VIEW: Ports that are set as Quick View ports (see page 28 for details on Quick View ports) by an administrator
• QUICK VIEW + POWERED ON: Ports that are both set as Quick View ports by an administrator and are powered on The
default setting is ALL.
SCREEN BLANKER If the console is left idle for the amount of time set with this function, the screen is blanked. Key in a value from 1 - 30 min-
utes, and then press the [Enter] key. A setting of 0 disables this function. The default is 0 (disabled).
HOTKEY COMMAND MODE Enables / Disables the hotkey command function. Hotkey Command Mode is enabled by default.
HOTKEY
Toggle between the two Hotkey Mode invocation sequences. Options are [Num Lock, Minus] and [Ctrl, F12].
OSD LANGUAGE Determines which language the OSD menus are displayed in. Choices are English, Spanish, French, German and simplified
Chinese.
TOUCHPAD Enables/Disables the touchpad.
Loading ...
Loading ...
Loading ...