Loading ...
Loading ...
Loading ...
Advanced Adaptive Cruise Control
84
TResuming Adaptive Cruise Control in stay-stopped status
Setting using the RES/SET switch
Even when the vehicle in front remains stopped, Adaptive Cruise Control can be activated
by operating the RES/+ switch or SET/- switch. (HOLD indicator) and (READY
indicator) turn off, and
(Adaptive Cruise Control indicator) changes from white to
green.
• Press the SET/- switch. The speed is automatically set to 20 mph (30 km/h).
• Press the RES/+ switch. The vehicle speed that was set before the stay-stopped function
activated is set again.
Page 92
Setting with the accelerator pedal
Depressing the accelerator pedal while stay-stopped is engaged cancels stay-stopped sta-
tus. At this time, Adaptive Cruise Control is resumed. The vehicle will attempt to travel at the
previously set vehicle speed unless a lead vehicle is detected. If a lead vehicle is detected,
Adaptive Cruise Control will maintain the previous following distance setting.
NOTE
When Adaptive Cruise Control is resumed from stay-stopped status and the
vehicle in front accelerates, your vehicle will also accelerate and continue to fol-
low the vehicle in front at the previously set following distance. However, if the
lead vehicle does not start moving or pauses, stay-stopped status will be auto-
matically restored after approximately 3 seconds.
WARNING
When the stay-stopped function is canceled, the vehicle will start. Make sure the
surroundings are safe before canceling the stay-stopped function.
NOTE
If the accelerator pedal is only slightly depressed, the stay-stopped function may
not be canceled, and Adaptive Cruise Control may not be resumed.
B9062BE-A.book 84 ページ ２０２３年１０月１６日 月曜日 午後１時１５分
Loading ...
Loading ...
Loading ...