Loading ...
Loading ...
Loading ...
Lane Departure Prevention Function
117
Operate the center information display to turn on Lane Departure Prevention Function.
On the “Lane Departure” screen of the EyeSight settings, select “Prevention & Warning”,
and then select “All Functions” or “Lane Departure Prevention Function Only” to turn this
function on.
Page 166
When Lane Departure Prevention Function is
turned on, the lane indicator (gray) and your
vehicle indicator are displayed on the combi-
nation meter display.
Lane Departure Prevention Function goes
into the standby status, and the lane indicator
(white) illuminates when all of the following
conditions are met.
• The vehicle speed is between approxi-
mately 37 mph (60 km/h) and 90 mph (145
km/h).
• The system is detecting the lane markings.
• Lane Centering Function is not operating.
• The driver is operating the steering wheel.
• On a road that has a lane width that is
between approximately 10 ft (3 m) and 15 ft (4.5 m)
• On a straight road or gentle curve
• Driving near the center of a lane
• Vehicle Dynamics Control is in the Vehicle Dynamics Control mode or TRACK mode.
How to use Lane Departure Prevention Function
H00282
Lane
indicator
(gray)
H00283
White
B9062BE-A.book 117 ページ ２０２３年１０月１６日 月曜日 午後１時１５分
Loading ...
Loading ...
Loading ...