Loading ...
Loading ...
Loading ...
Pre-Collision Braking System
29
Pre-Collision Braking System
When there is a risk of a collision with an identified object in front (a vehicle, motorcycle,
pedestrian, cyclist, etc.), the EyeSight system helps to prevent or minimize a collision by
warning the driver. If the driver still does not take evasive action to avoid a collision, the
brakes can be automatically applied just before the collision in order to reduce impact dam-
age, or if possible, prevent the collision. If the driver takes evasive action to avoid a collision,
Pre-Collision Braking Assist will operate in order to help the driver to prevent or minimize
the collision.
This system can be effective with direct rear-end collisions. In addition to rear-end colli-
sions, this system can be effective for avoiding collisions with crossing pedestrians and
cyclists. This system is also effective for avoiding collisions with oncoming vehicles, oncom-
ing motorcycles, pedestrians and oncoming cyclists when turning.
• CVT models: This function can be activated when the select lever is in the “D”, “M” or “N”
position.
• MT models: This function can be activated when the gear position indicator shows a posi-
tion other than “R”.
About identified objects for Pre-Collision Braking System
EyeSight recognizes the following objects as identified objects for Pre-Collision Braking
System. (Identified objects differ depending on the function.)
• Vehicles
• Motorcycles
• Pedestrians
• Cyclists
Continued on next page
WARNING
Pre-Collision Braking System operation
• Never use Pre-Collision Braking System and Pre-Collision Braking Assist to
stop your car or avoid a collision under ordinary conditions. These functions
cannot prevent collisions under all conditions. If the driver relies only on Pre-
Collision Braking System for Brake operation, collisions may occur.
• When a warning is activated, pay attention to the front of the vehicle and its
surroundings, and operate the brake pedal and/or take other actions if neces-
sary.
• The Pre-Collision Braking System recognizes vehicles, motorcycles, pedestri-
ans and cyclists as identified objects. The system is intended to avoid or
reduce the severity of collisions, but the system may not be able to recognize
objects under certain conditions*. For example, when a vehicle is viewed from
the side, oncoming vehicle, vehicles approaching in reverse, small animals or
children, or walls or doors are not likely to be detected.
B9062BE-A.book 29 ページ ２０２３年１０月１６日 月曜日 午後１時１５分
Loading ...
Loading ...
Loading ...