Loading ...
Loading ...
Loading ...
Getting Started
R&S
®
NGP800
29User Manual 5601.5610.02 ─ 04
5. Repeat for other channel if desired.
4.3.2 Activating the Channels Output
The output voltages can be switched on or off regardless of the instrument's operating
mode.
To activate the channel output, press the [Output] key on the front panel followed by
the desired channel key or vice versa.
The R&S NGP800 power supply displays the actual voltage on the output channel and
the actual current drawn by the load connected to the output. The display font color of
the selected channel changes depending on the operating mode of the instrument.
●
Constant voltage (CV)
– Voltage regulated, actual current is lesser than setpoint.
– Font color of measured voltage and current is green.
●
Constant current (CC)
– Current regulated, current drawn by the circuit is limited to setpoint.
– Font color of measured voltage and current is red.
When output is turned off, the display font color changes to white and the operating
mode is not displayed.
See the highlighted areas in
Figure 4-4.
Trying Out the Instrument
Loading ...
Loading ...
Loading ...