Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGP800
150User Manual 5601.5610.02 ─ 04
Example:
INST OUT1
ARB:DATA 10,1,0.5,0
ARB:REP 10
ARB:FNAM "ARB03.CSV",INT
ARB:SAVE
Saves a predefined arbitrary data to a filename ARB03.CSV in
the internal memory location.
Usage: Event
ARBitrary:SEQuence:BEHavior:END <>
Sets or queries the arbitrary endpoint behavior, when QuickArb function is finished.
Parameters:
<> HOLD | OFF
<state> HOLD | OFF
OFF
If the QuickArb function is finished, the respective channel is
deactivated automatically.
HOLD
If the QuickArb function is finished, the last arbitrary point of the
user-defined arbitrary list is held.
*RST: OFF
Example: See
Example "Configuring an arbitrary sequence" on page 145.
ARBitrary:SEQuence:CLEar
Clears the arbitrary sequence.
Usage: Event
ARBitrary:SEQuence:REPetitions <>
Sets or queries the number of repetitions of the arbitrary sequence
Parameters:
<repetition_rate> Range: 0 to 65535
The "0" indicates infinite repetition.
Example: See also
ARBitrary:REPetitions on page 149.
ARBitrary:SEQuence:TRANsfer
Transfers the defined arbitrary table to the selected channel.
Parameters:
<channel> 1 | 2 | 3 | 4
Example: See
Example "Configuring an arbitrary sequence" on page 145.
Advanced Operating Commands
Loading ...
Loading ...
Loading ...