Loading ...
Loading ...
Loading ...
4
1.5 Basic Installation
Units can be installed freestanding* or built-in. The front of the unit must be
unobstructed for proper air circulation and operation at all times.
NOTE: * Professional and overlay door models cannot be installed free standing. Units
with the “Articulating Hinge” must be installed as built-in due to safety restraints.
Area should be ventilated and without exposure to extreme temperatures.
Unit must be installed indoors and away from the elements of nature. These units do
not have certification from any agency for outdoor installation.
Any exceptions, alterations, or modifications to the appliance as manufactured will void
the warranty.
These units must be installed on a flat, level surface capable of supporting the loaded
weight of the appliance.
WARNING HAZARD OF ELECTRICAL SHOCK
Failure to disconnect the supply voltage to the appliance prior to servicing
could result in an electrical shock or possible death.
1.6 Electrical Requirements
115 / 120 VAC, 60 hertz, single phase power is required.
Use an outlet with a 15 amp delayed action fuse or circuit breaker.
DO NOT PUT A FUSE
ON THE NEUTRAL OR GROUND SIDE OF THE CIRCUIT
.
A properly grounded outlet is required for this appliance.
It is recommended that a single circuit receptacle be used for this appliance. Multiple
appliances on the same electrical circuit are not recommended.
DO NOT use an extension cord or multi-purpose surge protector device.
Loading ...
Loading ...
Loading ...