Loading ...
Loading ...
Loading ...
120
15.5: Divider Removal
This procedure would be required for an evaporator replacement.
Prior to removing the center divider the back cover to the upper compartment must be
removed, and the wire harnesses disconnected.
Mullion: Upper View
Mullion Bottom View
Remove both bottom and top screws
on each side of mullion.
The top screw must be removed so
that the mullion face can be
removed from the divider to obtain
door clearance.
Once the mullion face is removed, the divider
can be slid forward and out of the cabinet.
The dotted lines in the bottom photo show
the point where the mullion edge and
door will interfere if the divider is removed
prior to mullion face removal.
Loading ...
Loading ...
Loading ...