Loading ...
Loading ...
Loading ...
RIGOL Chapter 2 Front Panel Operation
User’s Guide for DSA700 Series
2-38
Select TOI and press Meas Setup to set the corresponding parameters.
Restart
Re-execute the active or suspended measurement. This setting is only available for
advanced measurement functions.
Pause
Suspend the measurement after the current measurement is finished. The
measurement data stops updating, but the sweep continues.
is displayed in
the measurement result display window. This setting is only available for advanced
measurement functions.
Resume
Resume the suspended measurement and the measurement data begins updating
again.
is displayed in the measurement result display window. This setting is
only available for advanced measurement functions.
Meas Mode
Set the measurement mode to single or continuous. In single mode, the analyzer
stops after the specified number of measurements. After this, every time when
Single is pressed, the system executes the specified number of measurements
and updates the measurement data. In continuous mode, the analyzer measures
continuously. This setting is only available for advanced measurement functions.
Loading ...
Loading ...
Loading ...