Loading ...
Loading ...
Loading ...
Chapter 3 Remote Control RIGOL
User’s Guide for DSA700 Series
3-9
4) View the resource
The resources found are shown under the "RIGOL Online Resource"
catalog.
For example, DSA710 (TCPIP::172.16.3.82::INSTR).
5) Communication test
Right click the resource name such as
DSA710 (TCPIP::172.16.3.82::INSTR) and select SCPI Panel
Control to open the remote control panel from which you can write
commands and read data.
6) Load LXI webpage
The analyzer conforms to LXI Core 2011 Device standards. You can load
LXI webpage conveniently through Ultra Sigma (right-click the resource
name and select "LXI-Web"). By default, some important information
about the analyzer such as the model, manufacturer, serial number,
description, MAC address and IP address is displayed on the webpage.
Note: If you want to view or modify the network settings of this
instrument, please click "Network Settings" and input the initial password
"RIGOL" (must be uppercase letters) in the pop-up window (by default,
the user name is empty ). In addition, you can click "Security" to reset the
password.
3. Remote Control via GPIB
1) Connect the devices
Connect the analyzer to the PC (configured with GPIB card) using
RIGOL USB-GPIB interface converter (option).
2) Install the device driver of the GPIB card
Install the driver of the GPIB card connected to the PC.
3) Set the GPIB address
Set the GPIB address of the analyzer according to the description in
"GPIB" of "I/O Settings".
Loading ...
Loading ...
Loading ...