Loading ...
Loading ...
Loading ...
RIGOL Chapter 2 Front Panel Operation
User’s Guide for DSA700 Series
2-94
For more details, please refer to "Parameter Setting".
6. Userkey
Turn on or off the display of the definition of User Key in the main interface.
7. Msg Switch
Enable or disable the display of messages. The types of messages in this
analyzer include Information Message, Error Message and Status Message. Only
Information Messages will be dispayed if the message display is turned off. For
more details about messages, refer to "Messages".
Work Setting
1． Front Switch
Set the status of the front switch and the default is "On".
On: when the analyzer is powered on, press the power switch at the front
panel to start up the analyzer.
Off: when the analyzer is powered on, it starts automatically.
2． Line Mode
Enter line mode. In line mode, in order to avoid fault operation, all the keys at
the front panel except the following are disabled.
Menu softkeys: select the desired preset type.
Esc: exit line mode.
3． UserKey Setting
Define a relative function for User Key at the front panel (the defining
method is as described below). After that, pressing User Key under any
operation interface can quickly enable the pre-defined function.
Press UserKey Set and select "On".
Open the desired function menu, such as: System Self-Test Key
Test.
Press User Key and the definition is finished. UserKey Set turns off
automatically.
Loading ...
Loading ...
Loading ...