Loading ...
Loading ...
Loading ...
38 MAINTENANCE
after the oven cools. If the oven is not clean after
one self-clean cycle, repeat the cycle.
• If oven racks were left in the oven and do not
slide smoothly after a self-clean cycle, wipe racks
and rack supports with a small amount of
vegetable oil to make them glide more easily.
• Fine lines may appear in the porcelain because it
went through heating and cooling. This is
normal and will not affect performance.
Periodic Maintenance
Changing the Oven Light
The oven light is a standard 220-240 V 40-watt
appliance halogen. Please read the following
instructions to replace the halogen lamp.
WARNING
• Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of
electric shock.
• Make sure that the oven and bulb are cool.
• Disconnect the electrical power to the appliance
at the main fuse or circuit breaker panel. Failure
to do so can result in severe personal injury,
death, or electrical shock.
• Wear gloves while changing the oven light. Glass
fragments from broken bulbs can cause risk of
injury.
• Gently twist the screwdriver blade while
changing the oven light. If you apply force, the
glass or oven may crack.
• Replace lamp with 250-volt lamp only.
1
Unplug the oven or disconnect power.
2
Turn the glass lamp cover counterclockwise to
remove.
3
Remove the halogen lamp from the socket
and dispose it in an environmentally friendly
way.
4
Insert the new halogen lamp.
5
Insert the glass lamp cover and turn it
clockwise.
6
Plug in the range or reconnect the power.
Removing, Assembling and
Dismantling the Oven Door
Removing and dismantling the oven door may be
needed to achieve better cleaning performance.
The oven door contains glass that can break. Care
should be taken when removing, assembling and
dismantling the oven door.
CAUTION
• To prevent burns, wait until the oven has cooled
down before touching any of its parts.
• The door is very heavy. Be careful when
removing, lifting and replacing the door.
• Do not lift the door by its handle. The handle is
not designed to support the weight of the door,
doing so can result in serious damage to the
door of the appliance.
• Do not hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring or stressing the glass
may weaken its structure, causing an increased
risk of breakage at a later time.
• Do not close the oven door until all the oven
racks are fully in place.
• Wear gloves when handling glass panels to
avoid injury if the glass breaks.
Removing the Oven Door
CAUTION
• Open and close the clamp completely in order to
prevent damaging the oven cavity.
1
Fully open the door.
Loading ...
Loading ...
Loading ...