Loading ...
Loading ...
Loading ...
Name Description
server group /
Secondary failover
server group
failover server group.
Hot standby server
Select a hot standby setup with one dedicated recording server as hot standby
server.
Advanced failover
settings
Opens the Advanced Failover Settings window:
l
Full Support: Enables full failover support for the device
l
Live Only: Enables only failover support for live streams on the device
l
Disabled: Disables failover support for the device
Failover service
communication
port (TCP)
By default, the port number is 11000. You use this port for communication
between recording servers and failover recording servers. If you change the port,
the recording server must be running and must be connected to the management
server.
Multicast tab (recording server)
Your system supports multicasting of live streams from recording servers. If multiple XProtect Smart Client
users want to view live video from the same camera, multicasting helps saving considerable system resources.
Multicasting is particularly useful if you use the Matrix functionality, where multiple clients require live video
from the same camera.
Multicasting is only possible for live streams, not for recorded video/audio.
If a recording server has more than one network interface card, it is only possible to use
multicast on one of them. Through the Management Client you can specify which one to use.
If you are using failover servers, remember to also specify the IP address of the network
interface card on the failover servers (see Multicast tab (failover server) on page 410).
Administrator manual | XProtect® VMS 2023 R1
403 | User interface details
Loading ...
Loading ...
Loading ...