Loading ...
Loading ...
Loading ...
3. Click the Matrix link in the initial rule description.
4. In the Select Matrix Configuration dialog box, select the relevant Matrix-recipient, and click OK.
5. Click the devices link in the initial rule description and select from which cameras you would like to send
video to the Matrix-recipient, then click OK to confirm your selection.
6. Click Finish if the rule is complete or define if required additional actions and/or a stop action.
If you delete a Matrix-recipient, any rule that includes the Matrix-recipient stops
working.
Add Matrix recipients
To add an existing Matrix recipient in Management Client:
1. Expand Clients, then select Matrix.
2. Right-click Matrix Configurations and select Add Matrix.
3. Fill out the fields in the Add Matrix dialog box.
1. In the Address field enter the IP address or the host name of the required Matrix recipient.
2. In the Port field enter the port number used by the Matrix recipient installation.
4. Click OK.
You can now use the Matrix recipient in rules.
Your system does not verify that the specified port number or password is correct or
that the specified port number, password, or type corresponds with the actual Matrix
recipient. Make sure that you enter the correct information.
Send the same video to several XProtect Smart Client views
You can send the same video to Matrix positions in several of the XProtect Smart Client views, provided the
Matrix positions of the views share the same port number and password:
1. In XProtect Smart Client, create the relevant views and Matrix positions that share the same port
number and password.
2. In the Management Client, add the relevant XProtect Smart Client as a Matrix-recipient.
3. You may include the Matrix-recipient in a rule.
Administrator manual | XProtect® VMS 2023 R1
258 | Configuration
Loading ...
Loading ...
Loading ...