Loading ...
Loading ...
Loading ...
1. In the Site Navigation pane, select System Dashboard > System Monitor Thresholds.
2. Select the Enabled check box for the relevant hardware if you have not already enabled it. The figure
below shows an example.
3. Drag the threshold control slider up or down to increase or decrease the threshold value. There are two
sliders available for each hardware piece shown in the threshold control, separating the Normal,
Warning, and Critical states.
4. Enter a value for the calculation interval or keep the default value.
5. If you want to set values on individual pieces of hardware, select Advanced.
6. If you want to specify rules for certain events or within specific time intervals, select Create rule.
7. Once you have set the thresholds levels and calculation intervals, select File > Save from the menu.
View evidence locks in the system
Evidence Lock under the System Dashboard node shows an overview of all protected data on the current
surveillance system.
Find an evidence lock by filtering after, for example, who created it or when.
1. In the Site Navigation pane, select System Dashboard > Evidence Lock.
2. Get an overview and find the relevant evidence locks. You can filter after and sort the different
metadata related to the evidence locks.
All information shown in the Evidence Lock window is snapshots. Press F5 to refresh.
Print a report with your system configuration
You make many choices when you install and configure your VMS system, and you may need to document
these. Over time it is also hard to remember all the settings you have changed since the installation and initial
configuration - or just during the last couple of months. That is why it is possible to print a report with all your
configuration choices.
Administrator manual | XProtect® VMS 2023 R1
282 | Configuration
Loading ...
Loading ...
Loading ...