Loading ...
Loading ...
Loading ...
Add a user-defined/manual event from a remote site:
1. On the central site, expand Servers and select Recording Servers.
2. In the Overview pane, select the relevant remote server and the Events tab.
3. The list contains the predefined events. Click Add to include user-defined or manual events from the
remote site in the list.
Use an event on a remote site to trigger an alarm on the central site:
1. On the central site, expand Alarms and select Alarm Definitions.
2. In the Overview pane, right-click Alarm Definitions and click Add New.
3. Enter values as needed.
4. In the Triggering Event field, you can select between the supported predefined and user-defined
events.
5. In the Sources field, select the remote server representing the remote site that you want alarms from.
6. Save the configuration when done.
Use an event on a remote site to trigger a rule-based action on the central site:
1. On the central site, expand Rules and Events and select Rules.
2. In the Overview pane, right-click Rules and click Add Rule.
3. In the wizard that appears, select Perform an action on <event>.
4. In the Edit the rule description area, click event and select between the supported predefined and
user-defined events. Click OK.
5. Click devices/recording server/management server and select the remote server representing the
remote site that you want the central site to start an action for. Click OK.
6. Click Next to get to the next wizard page.
7. Select the conditions that you want to apply for this rule. If you do not select any conditions, the rule
always applies. Click Next.
8. Select an action and specify the details in the Edit the rule description area. Click Next.
9. Select a stop criterion if required. Click Next.
10. Select a stop action if required. Click Finish.
Administrator manual | XProtect® VMS 2023 R1
302 | Configuration
Loading ...
Loading ...
Loading ...