Loading ...
Loading ...
Loading ...
INSTALLATION
STEP THREE: CONNECT GAS & ELECTRICAL SUPPLY
I. Connect the gas supply.
NOTE: Before placing appliance into operation, always check for gas leaks. This must be performed by your dealer, a qualied
licensed plumber, or gas service company
J. Connect the electrical supply.
F
A
B
C
BD
E
F
A. Gas pressure regulator.
B. Adapter (must have 1/2” male pipe thread).
C . Flexible connector.
D. Manual gas shut-off valve.
E. 3/4” or 1/2” gas supply.
F. Use pipe-joint compound.
To avoid risk of electrical shock, personal injury or death; leak testing of the appliance must be conducted
according to the manufacturer’s instructions. Before placing appliance in operation, always check for gas
leaks with soapy water solution.
DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS
DANGER
!
DESIGNED & BUILT IN USA
PROFESSIONAL COOKING EQUIPMENT
13592 Desmond St., Pacoima, CA 91331 818.897.0808 tel 888.753.9898 toll free www.americanrange.com
10
WARNING
!
The electrical service in the building must be equipped with a properly grounded receptacle, in
accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/
NFPA 70, or in Canada - to Canadian electrical codes, CSA C22.2.
DO NOT CUT OR REMOVE THE GROUNDING PRONG FROM THIS PLUG
I
Loading ...
Loading ...
Loading ...