Loading ...
Loading ...
Loading ...
Accessing t he Ca m e ra
3
Brightness: Adjusts the brightness of the image.
Contrast: Adjusts the relative differences between one pixel and the next.
image.
closest to the image
rescent, and
manually.
olor tone.
s with
or White Balance.
firmware
nce.
ncy of your camera’s imager
to the frequency of indoor light sources, e.g. fluorescent lighting. You can also select 50
may appear in your
Saturation: Adjusts the saturation of the
Sharpness: Adjusts the sharpness of the image.
Gamma: Adjusts the relative proportions of bright and dark areas.
White balance: The camera automatically adjusts the color to be
you are viewing. You can choose one of the three presets: Indoor, Fluo
Outdoor. You can also choose Manual to adjust the white balance
Color Temperature: Adjust the camera image to have a warmer or cooler c
Note this function is available for GV-FER5700 and GV-EFER3700 Serie
firmware V1.14 or later, and only appears when you choose Manual f
Tint: Move the slider to remove undesired color cast for a more neutral color. Note this
function is only available for GV-FER5700 and GV-EFER3700 Series with
V1.14 or later, and only appears when you choose Manual for White Bala
Flicker less: The camera automatically matches the freque
Hz or 60 Hz manually. If these don’t match, faint light and dark bars
images. Check the power utility to determine which frequency is used.
Note: For GV-FER5700, GV-EFER3700 / EFER3700-W, the function of Flicker is listed
in Video Signal Type, 4.1.1 Video Settings.
Image Orientation: Changes the image orientation on the Live View w
Slowest Shutter Speed: Shutter speed controls the amount of the light
image sens
indow.
s enters the
or and directly impacts the quality of image presentation. Under low light
A slow
e, but moving
elect Auto for
r automatic
shutter control.
D/N: Sets the Day/Night mode of the camera. Select Auto for automatic switch between
day mode and night mode depending on the amount of light detected. Select Black and
white to switch the camera to night mode. Select Color to switch the camera to day
mode. Sets the light sensor’s sensitivity of switching between day mode and night mode.
The value 10 is the most light-sensitive. Select Trigger by Input to switch between day
conditions, a faster shutter speed will lower color quality and image clarity.
shutter speed allows more light to enter and creates a brighter overall imag
objects may appear blurry. You can manually select a shutter speed, s
automatic shutter speed, or select Auto (Higher Shutter Speed) for faste
81
Loading ...
Loading ...
Loading ...