Loading ...
Loading ...
Loading ...
Chapter 2 Getting Started
This section provides basic information to get the camera working on the network.
2.1 Installing on a Network
These instructions describe the basic connections to install the camera on the network.
1. Using a standard network cable, connect the camera to your network.
2. Connect power using one of the methods:
• Using the supplied power adapter, connect to power.
• Use the Power over Ethernet (PoE) function. The power will be provided over the
network cable.
3. You can now access the Web interface of the camera.
• If the camera is installed in a LAN without the DHCP server, the default IP address
192.168.0.10 will be applied. You also can assign a static IP address. See 2.1.2
Assigning an IP Address.
• If the camera is installed in a LAN with the DHCP server, use GV-IP Device Utility to
look up the camera’s dynamic IP address. See 2.1.1 Checking the Dynamic IP
Address.
60
Loading ...
Loading ...
Loading ...